How to Make Flashing Led Circuit Board

Led or light emitting diode emits a very distinguished and strong light unlike the ones emitted by other types of lighting devices. In comparison to the others, this is a better choice as it uses less electricity and it lasts longer. It does not use filaments so it does not burn.

One of the most commendable uses is the flashing Led light. This can be used as an attentiveness seeker. If one is stranded on a place, this kind of lighting can work as a help signal. Habitancy from a principal length can see the signal.

Bright Led Flashlights

This is how you can make this flashing Led circuit board:

How to Make Flashing Led Circuit Board

Step 1: First, you should already have an Led bulb. Go to the hardware and electronics store and find a flashing bulb Led. Choose the one that can be hooked to a 9-volt battery system.

Step 2: The next part is to attach the bulb. Join together the longer lead of the Led (this is usually the longer one) to the inescapable end of the battery. Join together the shorter lead of the Led to the negative end of the battery.

Step 3: You should also have the circuit board at the ready. Using a plier, insert the leads related to the battery to the circuit board plug. By this time, you can already recognize the bulb flashing.

Step 4: Now make the relationship permanent. Get a 20-gauge wire and snip about 4 inches of it. Take off about half an inch of copper conductor at the ends of the wire. get ready your soldering iron. Once it has already heated up, solder the red wire to the switch. Let it cool down before you switch it on.

Step 5: Once the soldered part has already cooled down, you can attach the inescapable lead attached to the inescapable end of the battery to the switch. Join together the negative lead, negative end of battery and the negative lead of the battery. Now you can test the relationship by switching it on. The Led bulb you have installed should already blink.

Step 6: You can add more bulbs to the circuit if you want just effect the same procedures stated above.

If you buy discrete colors of bulbs, you can also use this for party effects and not just to attract attentiveness while urgency situations. This is a good way to spruce up an event. You use the smaller bulbs of discrete colors to make a greeting card more exciting too-
perfect for the holiday season.

How to Make Flashing Led Circuit Board

The Best Civilian Stun Gun Is the Stun specialist Multi-Function Rechargeable Stun Gun

Many of you have read my articles and already know that the Stun master Multi-Function Rechargeable Stun Gun is one of my beloved Self Defense Weapons. But just in case you haven't read them, I will divulge it and list the features and the advantages again. This way you can make an informed decision when you are ready to invest in your safety.

Description of the Multi-Function Stun Gun

Bright Led Flashlights

This stock is a fairly new Self Defense weapon, so many of you may not be familiar with it. Not to mince words, they are naturally a non lethal gadget that gives you time to leave an unsafe area. Law promulgation have used Stun Guns for years. Because they are not high-priced and extremely effective, they are now used by many civilians also.

The Best Civilian Stun Gun Is the Stun specialist Multi-Function Rechargeable Stun Gun

Features of the Multi-Function-Stun Gun:

• 5 million volts
• Flashing red urgency lights
• Black nylon holster
• Very lively Led flashlight
• A disable pin wrist strap
• Comes with a Free battery charger so no batteries are required

Now for the Advantages:

• It's rechargeable
• Easy to carry and conceal
• The flashing light will attract attentiveness from citizen nearby you. It can also be used when you have car problems.
• The 110db alarm is loud and will also attract attention.
• There is a reflective cup behind the bulb of the flashlight that will make it brighter.
• Very affordable. Remember to think of it as an investment, not an expense.
• Just in case the wrist strap pin is removed, the stun gun will not fire. You can be assured it won't be used against you.
• Dimensions: 4 3/4" x 2 1/2" x 1" manufacture it the smallest, most distinguished stun gun available today.

The biggest benefit of the Stun master Mulit-Function Rechargeable Stun Gun for me is that you don't have to categorically use it for it to be effective. Why is that? Because when your attacker sees the flashing red lights and hears the 110 db siren, they won't think twice about leaving the area. Because the last thing they want is attentiveness to what they are trying to do. So they are gone and it's very inherent that you won't have to use it.

Remember, it is leading with any Self Defense stock to learn how to use it safely. That means you will have to custom to feel comfortable using it. If you wait until you need it, it will be too late. Your best opening to defend yourself is to be prepared when you need it.

Don't be a Victim!

The Best Civilian Stun Gun Is the Stun specialist Multi-Function Rechargeable Stun Gun